Specifications – Linak LA36 User Manual
Page 9
9
Specifications
Motor:
Permanent magnet motor 12, 24, or 36V *
Motor protection:
Automatic protection resets thermal overload (Option)
Cable:
Motor: 2 x 14 AWG PVC cable
Control: 6 x 20 AWG PVC cable **
Gear ratio:
6 different gear ratios available in steel
(500 N, 1,700 N/2,600 N, 4,500 N, and 6,800/10,000 N)
Slip clutch:
Mechanical - overload protection through an integrated slip
clutch is optional adjusted to 1.2-1.4 times max. load
Brake:
Integrated brake ensures a high self-locking ability.
The brake is deactivated when the actuator is powered in
order to obtain a high effi ciency
Hand crank:
As a standard feature the actuator can be operated manually
Housing:
The housing is made of casted aluminium, coated for
outdoor out and in harsh conditions
Spindle part:
Outer tube: Extended aluminium anodised
Inner tube: Stainless steel AISi304/SS2333
Acme spindle: Trapezoidal spindle with high effi ciency
Temperature range:
- 30
o
C to +65
o
C
-
22
o
F to +150
o
F
Full performance +5
o
C to +40
o
C
End play:
2 mm maximum
Weather protection: Rated IP66 for outdoor use. Furthermore, the actuator can
be washed down with a high-pressure washer.
* BUS actuators only 24V - please see the installation guide.
** Special control cabels for BUS actuator - please see the installation guide.