Lincoln LFC 3000 - Manual (Page 6)

Page Number - 6
LFC 3000 User’s Manual
Series “A”
Form 403082
CUSTOMER MENU
The Customer Configure Menu is accessible though all the
keypads. At the initialization of the system or when modifi-
cations are done on this menu, the data is automatically
updated at the other keypads through the network. It is not
necessary to configure all the keypads separately.
Customer Menu
Products
All the fluids controlled by the system can be identified in
alphanumerical characters. In certain installations, the
same product can be pumped from different tanks (maxi-
mum 8 tanks). The LFC 3000 allows you to manage these
tanks separately to control their respective stock level.
Assign the tank from which the product will be pumped.
Enter
Tank Number 1
Enter the tank number
ENTER
Product 1
Motor Oil
Use Up / Down key to select the product number
ENTER
Enter the product’s identification by using the alphanumeric
keypad
ENTER
The system goes back to the prompt “Products”
Customer Menu
Hose
All your dispensing points (hoses) must be linked to the tank
it is dispensing from.
ENTER
Enter Hose
01
Enter the hose number
ENTER
Enter Tank
01
Enter the tank number
ENTER
The system will confirm the name of the product configured
for verification;
Select Product
Motor Oil
ENTER
Enter hose “00” to exit
Supervisor Menu
Add New User
Up to 99 users can be stored in the system. Any 4 digit PIN
numbers can be assigned to an operator. It is recommend-
ed that the supervisor keep a list of the PIN numbers in
case he needs to remove one of them. Two users cannot
have the same PIN Number.
ENTER
New User Pin
****
ENTER
New User Name
(User name)
ENTER
New User Name
User added
Supervisor Menu
Remove User
ENTER
Enter Ex-PIN
****
ENTER
Enter Ex-PIN
User deleted
The user will be deleted from the system.
Supervisor Menu
Customer Config.
ENTER
Customer cfg. PIN
1111
Access to the customer security level. Factory PIN number for
customer menu is 1111.
Supervisor Menu
Exit
ENTER
Return to User Screen