Lennox Hearth PAGEPRO 4650EN - Manual (Page 118)

Duplexing 108
Duplexing
Select paper with high opacity for duplex (double-sided) printing. Opacity
refers to how effectively paper blocks out what is written on the opposite side
of the page. If the paper has low opacity (high translucency), then the printed
data from one side of the page will show through to the other side. Check
your application for margin information. For best results, print a small quantity
to make sure the opacity is acceptable.
Duplex (double-sided) printing can be done manually or can be done auto-
matically with the duplex option installed and selected. For installing the
duplex, refer to “Installing the Duplex” on page 205.
Note
For details on supported media types for duplex printing, see “Media
Specifications” on page 84.
Duplexing envelopes, labels, thick paper3 or transparencies is not
supported.
"
Duplex printing can be performed with enough memory (no less than
256 MB) installed in the printer.
How do I autoduplex?
You should verify that the duplex is physically installed on the printer to suc-
cessfully duplex (double-sided) the job.
Check your application to determine how to set your margins for duplex
(double-sided) printing.
The following Binding Position settings are available.
If “Short Edge” is selected, the pages will be laid out to flip
at the top.
If “Long Edge” is selected, the pages will be laid out to flip
at the side.
1
3
1
2
1
1 1
1
1
2
3