Lennox Hearth PAGEPRO 4650EN User Manual
Page 130
Advertising
Replacing Consumables
120
1
Turn off the printer and discon-
nect the power cord.
"
There are extremely hot
parts within the machine.
Before replacing the
fuser unit, wait about 30
minutes after turning off
the machine, and then
check that the fusing sec-
tion has reached room
temperature; otherwise,
you may get burnt.
2
Lift the lever shown in the figure.
3
Open the rear cover.
"
Do not touch any parts
inside the printer.
Advertising
This manual is related to the following products: