Clearing media misfeeds, Clearing media misfeeds 153, Caution – Lennox Hearth PAGEPRO 4650EN User Manual

Page 163

Advertising
background image

Clearing Media Misfeeds

153

Clearing Media Misfeeds

To avoid damage, always remove misfed media gently, without tearing it. Any
piece of media left in the printer, whether large or small, can obstruct the
media path and cause further misfeeds. Do not reload media that has misfed.

Note

The image is not fixed on the media before the fusing process. If you
touch the printed surface, the toner may stick to your hands, so be
careful not to touch the printed face when removing the misfed media.
Make sure not to spill any toner inside the printer.

CAUTION

Unfused toner can dirty your hands, clothes, or anything else it gets on.
If you accidentally get toner on your clothes, lightly dust them off as
best as you can. If some toner remains on your clothes, use cool, not
hot water, to rinse the toner off. If toner gets on your skin, wash it off
with cool water and a mild soap.

CAUTION

If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.

If, after clearing the media misfeed, the misfeed message in the control panel
window persists, open and close the printer’s covers. This should clear the
misfeed message.

Advertising
This manual is related to the following products: