Lennox Hearth PAGEPRO 4650EN User Manual
Page 226
Advertising
Offset Tray
216
4
Tighten the two screws at both
ends of the bottom of the offset
tray.
5
Draw the extension tray (1).
"
When printing a thick
paper, you can flip the
stopper as shown in the
figure below (2).
6
Reconnect all interface cables.
7
Reconnect the power cord, and
turn on the printer.
8
Declare Offset Tray in the Windows printer driver (Properties/Configure
tab).
Advertising
This manual is related to the following products: