Lennox Hearth PAGEPRO 4650EN - Manual (Page 57)

Configuration Menu Overview 47
LOGICAL
TRAY
0-9
Settings
PHYSICAL TRAY1/
PHYSICAL TRAY2/
PHYSICAL TRAY3/
PHYSICAL TRAY4
Select the tray that is used for printing
when a print job is received from another
manufacturer’s printer driver.
The default setting for LOGICAL TRAY
2 is PHYSICAL TRAY 2 . The default
settings for all other trays are PHYSI-
CAL TRAY 1 .
"
PHYSICAL TRAY3 and
PHYSICAL TRAY4 appear only if
an optional lower feeder unit is
installed.
DUPLEX
Settings
OFF /LONG EDGE/SHORT EDGE
If LONG EDGE is selected, the pages will be printed on both sides
of the paper for long-edge binding.
If SHORT EDGE is selected, the pages will be printed on both
sides of the paper for short-edge binding.
The setting specified in the printer driver will override this menu
setting.
COPIES
Settings
1 -9999
Specify the number of copies to be printed.
The setting specified in the printer driver will override this menu
setting.
COLLATE
Settings
ON/OFF
If ON is selected, all pages of the document are printed before the
next copy is printed.
If OFF is selected, all copies of the document are not printed
separately.
The setting specified in the printer driver will override this menu
setting.
"
This menu item appears only if an optional hard disk kit or a
CompactFlash card of 1 GB or more is installed.