Lennox Hearth PAGEPRO 4650EN - Manual (Page 86)

Configuration Menu Overview 76
LEFT
ADJUST
MENT
LEFT
ADJ
TRAY1
Settings
-8-0-7
When printing on media in Tray 1, specify
the size of the left margin.
LEFT
ADJ
TRAY2
Settings
-8-0-7
When printing on media in Tray 2, specify
the size of the left margin.
LEFT
ADJ
TRAY3
Settings
-8-0-7
When printing on media in Tray 3, specify
the size of the left margin.
LEFT
ADJ
TRAY4
Settings
-8-0-7
When printing on media in Tray 4, specify
the size of the left margin.
LEFT
ADJ
DUPLEX
Settings
-8-0-7
When printing on media using duplex
pass, specify the size of the left margin.
LD
POWER
Settings
0-7
Adjust the intensity of laser output.
VIDEO
TIME
LAG
Settings
0-15
When resolution is set to 1200 dpi, adjust the video
output start point horizontally in the even lines.
SUP-
PLIES
RE-
PLACE
FUSER
UNIT
Settings YES/NO
Reset the service life counter for the
fuser unit.
QUICK
SET-
TING
UP-
DATE
SET-
TING
Setup
EXECUTE/ CANCEL
Select whether or not to update the printer settings
from the definitions file on the USB memory device.
If EXECUTE is selected, the printer settings are
updated.
If CANCEL is selected, the settings are not updated.
BACKUP
SET-
TING
Setup
EXECUTE/ CANCEL
Select whether or not to save the printer settings
information on a USB memory device.
If EXECUTE is selected, the printer settings are
saved on a USB memory device.
If CANCEL is selected, the settings are not saved.