LG SH35SD-S - Manual (Page 28)

 Troubleshooting
Trouble
shoo
ting
6
6
Troubleshooting
PROBLEM CAUSE CORRECTION
No Power The power cord is disconnected. Plug the power cord into the wall outlet securely.
No Picture
The TV is not set to receive the DVD signal.
Select the appropriate video input mode on the
TV so the picture from the DVD Receiver appears
on the TV screen.
The video cables are not connected securely.
Connect the video cables securely to both the TV
and DVD Receiver.
There is little or
no sound
Equipment connected via the audio cable is not set
to receive DVD signal output.
Select the correct input mode of the audio
receiver so you can hear the sound from the DVD
receiver.
The audio cables are not connected to the speakers
or receiver securely. Connect the audio cables into the connection
terminals correctly.
If not, connect speaker cables correctly. Speaker cables connected correctly.
The DVD picture
quality is poor
The disc is dirty.
Clean the disc using a soft cloth with outward
strokes.
A DVD/CD will
not play No disc is inserted. Insert a disc.
An unplayable disc is inserted.
Insert a playable disc (check the disc type, colour
system and regional code).
The disc is inserted upside down.
Place the disc with the label or printed side facing
upwards.
The menu is open on screen. Press SETUP to close the menu screen.
There is a parental lock which prevents the
playback of DVDs with a certain rating.
Enter your password or change the rating level.
Humming noise
heard while a
DVD or CD is
playing
The disc is dirty.
Clean the disc using a soft cloth with outward
strokes.
The DVD receiver is located too close to the TV,
causing feedback. Move DVD receiver and audio components
further away from your TV.
Radio stations
can’t be tuned in
properly
The antenna is positioned or connected poorly.
Check the antenna connection and adjust its
position.
Attach an external aerial if necessary.
The signal strength of the radio station is too weak. Tune to the station manually.
No stations have been preset or preset stations
have been cleared (when tuning by scanning preset
channels).
Preset some radio stations, see page 24 for
details.
The remote
control doesn’t
work well / at all
The remote is not pointed directly at the unit. Point the remote directly at the unit.
The remote is too far from the unit.
Use the remote within 23 feet (7m) of the DVD
receiver.
There is an obstacle in the path between the
remote control and the unit.
Remove the obstacle.
The battery in the remote control are flat. Replace the battery with an new ones.
HT355SD-A2_DPANLLK_ENG_4769.indd28 28 2010-04-05 ¿АИД 2:44:54