Lexmark C522 - Manual (Page 62)

Setting the Paper Type and Paper Size
62
Loading media
3 Lift up and then back on the extension until it stops at a 90 degree angle.
To close the media stop, fold the extension forward and down. Raise the media stop, and then fold it back down
into its closed position.
Setting the Paper Type and Paper Size
After setting the Paper Type and Paper Size to the correct values for the type and size used in the trays, then any trays
containing the same size and type are automatically linked by the printer.
Note: If the size of the media being loaded now is the same size as the media previously loaded, do not
change the Paper Size setting.
To change the Paper Size and Paper Type setting:
1 Make sure the printer is on and the Ready message appears.
2 Press and release .
3 Press until Paper Menu appears, and then press .
4 Press until Paper Size/Type appears, and then press .
5 Press until the needed media source is reached, and then press .
6 Press to scroll through a list of possible paper sizes to locate the correct
size, and then press .
7 Press or to scroll through a list of possible paper types to locate the
correct type, and then press . This saves this setting as the new user default type or size setting.
The message Submitting Selection appears. The printer returns to the Paper Menu.
8 Press twice to return to Ready.