Maintenance and repair – LumiSource Rock Show Venue User Manual

Page 7

Advertising
background image

7

If a problem occurs while using this product, please contact us. DO NOT open unit or attempt to repair on your own. It may result in

serious injury from electric shock and void your product warranty.

MAINTENANCE AND REPAIR

Q: Why isn’t there sound coming from any of my speakers?

A: Ensure Rock Show™ is connected as described in the Setup Guide. Check that the power to the unit is on and the volume is turned

up. Also, make sure your audio device is not set to “MUTE” and volume is turned up.

Q: Why isn’t there sound coming from one of my speakers?

A: Make sure that both the left and right channel audio inputs are securely connected to Rock Show™ and the audio device. Also,

make sure the Unit Connectors are securely connected to link the two speakers.

Q: What if I want to move my speakers farther away from the television?

A: This is why we provide the RCA audio coupler. You will connect the red and white ends of the two provided RCA cords through the

coupler without changing any other connections described in Connection Options 1, 2, or 3.

Q: Why doesn’t my microphone control the singer in Rock Band®?

A: Gaming microphones with USB connections must be connected directly to their respective game consoles. The RockShow™ mic.
will still work with

Rock Band®, but is not programmed to directly control elements of the game. Therefore, you should just connect your

USB mic. to your game console as usual and then connect Rock Show™ using one of the methods in this manual.

Q: Where can I get more information?

A: Visit us at www.BOOMCHAIR.com or www.LumiSource.com

Contact information: LumiSource, Inc. 2950 Old Higgins Road, Elk Grove Village, IL 60007

E-mail: [email protected]

Please give us a call or e-mail before returning the item to a retailer.

TROUBLESHOOTING ROCK SHOW™

USING MULTIPLE UNITS TOGETHER (DAISY CHAINING)

Connections from

audio source

Second Rock Show™ main unit

It’s even more fun to link multiple units together for an ULTIMATE ROCK SHOW! Here’s how you can link up to 4 pairs:

Step 1: Connect RCA cord from audio source to AUDIO IN on Rock Show™ using one of the previous methods.

Step 2: Connect the two main units using additional RCA cord from the AUDIO OUT of First Rock Show to the AUDIO IN of second

Rock Show™.

First Rock Show™ main unit

(ADAPTER)

BACK PANEL

(ADAPTER)

BACK PANEL

(ADAPTER)

BACK PANEL

(ADAPTER)

BACK PANEL

Advertising