Legacy Car Audio LCD17A User Manual

Page 5

Advertising
background image

Page 7

Page 4

Tuner

Controls

1. BAND

BUTTON

In radio mode,

press the BAND(BND)

button switches the

receiver from

AM to

FM or

vice versa.

The icon

of the

selected band

will be

visible on

the display

.

2. TUNING

CONTROL

Rotate this

knob at

radio mode

to select

the desired

radio broadcasting

station.

The selected

frequency will

appear on

the LCD

display.

3. ST/MON BUTT

ON

(This operation is

effective on

FM reception only

.)

During radio mode,

press this butt

on to change

between mono and

stereo

modes. The

character ST

will appear

on the

LCD display

while there

is a

strong

signal from an

FM station that

is broadcasting in

stereo. Mono improves

the

reception of the

distant stereo F

M

stations.

4. LOC/DXBUTTON

(This operation is

effective on

FM reception only

.)

In RADIO mode,

press the LOC

button toggles between

local or distant

FM

reception. Pressing

LOC will

improve reception

in some

areas where

the signal

is too

strong. LOC

will appear

on the

LCD display

indicating you

are in

the local

reception mode.

Press it

again to

release it

to improve

distant reception

when

you are

located in

an area

with a

weak signal.

9. MODE BUTT

ON

Press the

MODE(MOD) button

to select

the CDP

(if disc is

loaded into the

disc

slot), RADIO

or A

UX mode.

CARE

FOR

USING

CD'S:

1. T

o

keep the disc clean:

Before playing a disc, wipe it of

f with a clean, dust-free cleaning cloth.

Wipe the disc outwards

from

the disc center

.

2. When one has already been inserted. Doing so may damage the unit

Do not attach any sticker or adhesive tape on the disc.

Handle the disc by its edge to keep the disc clean and do not touch the surface.

. Insert a disc

with labeled surface up, or it will damage the unit.

3. Do not expose the disc to direct sunlight or nearby heat sources such as heating vents,

caliduct which can cause the disc to warp.

Do not leave disc in a car if it is parked in direct sunlight as that will lead to a

considerable rise in the temperature inside the car

.

4. Do not use any secondhand or rented disc, usually

, there is glue on the surface of

those discs, it will stop the unit working and damage it.

5.

Always store the disc in its case

for protection. Scratched up discs will produce poor

sound performance

and cause

CD player

to skip.

6. On rainy days, or in wet areas, moisture may form on the disc or the optical parts, The

playback may not be possible. If moisture forms on the disc, wipe it of

f with a soft cloth.

If moisture forms on the optical parts of the unit, allow the unit to sit for about one hour

with power on.

7. Do not use solvents such as benzine or thinners. Commercially available cleaners or

anti-static spray will damage the unit.

About CD-R/CD-R/W discs:

In addition

to commercially-recorded

audio CD's,

this unit

can play

CD-R and

CD-R/W discs.

In come cases,

particularly when recorded

on older CD

burners,

some CD-R

and CD-R/W

discs may

not play

.

Also, whenever

you are

recording

a CD

for playback

in this

receiver,

it is

recommended that

you record

at 24x

or

slower speed

for CD-R

and 4x

or slower

for CD-R/W

to achieve

higher signal

quality and

better playback

performance.

Advertising