Remote control preparation, Tips on battery use, Tips on remote control operation – Lenoxx Electronics DVD-2002 User Manual

Page 12: Point the remote control in the right direction

Advertising
background image

REMOTE CONTROL PREPARATION

Remove the BATTERY COMPARTMENT DOOR of the REMOTE

CONTROL and insert 2 size “AAA” alkaline batteries (included)

according to the + and - markings inside the BATTERY

COMPARTMENT of the REMOTE CONTROL unit.

Tips on Battery Use

•

Reversing polarities will damage the batteries and possibly your
REMOTE. Be sure to follow polarity ( + and -) as indicated.

•

Do not mix different types together (Alkaline, Carbon-Zinc,
Nickel-Cadmium etc.), or old batteries with new ones.

•

When not in use for an extended period of time (over 60 days)
remove the batteries to prevent possible acid leakage or

corrosion resulting in damage to your remote.

•

When the batteries have become discharged, they must be
disposed of in a safe manner that complies with all applicable

laws.

•

Installation of batteries should only be done by an adult
(for safety).

Battery Installation

Remote Control Operation Range

Point the REMOTE CONTROL unit from less than 20 feet from

the remote control sensor and within about 60

0

of the front of the

DVD player (not your TV set).

Tips on REMOTE CONTROL operation

•

The operating distance may vary according to the brightness of
the room.

•

Do not point bright lights at the remote control sensor.

•

Do not place objects between the remote control unit and the
remote control sensor.

•

Do not use this remote control unit while simultaneously
operating the remote control unit of any other equipment.

! !

REMOTE SENSOR RANGE

within 20 feet

®

Remember to point the

REMOTE CONTROL in the

direction of the DVD player,

not the TV.

Point the REMOTE CONTROL in the

Right Direction

When you want the remote to operate the DVD player, point the

remote at the DVD player, not the TV. The Remote has to be

pointed in the correct direction and toward the correct component

(DVD player) in order for the remote control’s signal to

communicate with the remote sensor on the DVD player. Make

sure there is a clear path between the remote control and the DVD

player so the signal is not blocked.

11

IB-DVD-2002-WC-ZR-E-V1

Advertising