Initial setting – Lenoxx Electronics DVD-2002 User Manual

Page 16

Advertising
background image

INITIAL SETTING

Once the initial programming is entered, it is retained in memory until changed. The
player will always be operated under the same conditions even if the set is shut off.

Common procedure for initial settings is as follows:

1

Press SETUP button in the stop mode, a menu like below will appear on your TV.

2

Move the DIRECTION buttons ( & ) to select the preferred item.

3

Press SELECT button, and a sub-screen will open. Each screen for setting the value is displayed (SELECT button is similar to an ENTER

button on a computer).

4

Move the DIRECTION buttons ( , , & ) to select what you want to change.

5

Press SELECT button to confirm (this is like the “ENTER” button on a computer).

6

Press SETUP button to close the initial menu and return to STOP mode.

3&5
(

SELECT

BUTTON)

2&4

(DIRECTION

BUTTONS)

1&6

(SETUP

BUTTON)

Setting LANGUAGE (OSD MENU, SUBTITLE, AUDIO AND DVD MENU)

1

After entering the initial setting, move the DIRECTION buttons ( , , & ) t o

select the “Language”.

2

Press the SELECT button to open language menu.

3

Move the DIRECTION buttons ( , , & ) again to select “OSD MENU”, then

press SELECT button to open submenu of OSD.

4

Select the language you want for your OSD using the UP & DOWN buttons ( , ), press

SELECT button to confirm.

5

Follow the above 3-4 steps to set the languages for subtitle, audio and DVD Menu.

6

To exit the language setting menu, press the UP button to return back to the initial

setting menu, or press SETUP button to close initial setting directly.

15

SELECT

BUTTON

LEFT

RIGHT

UP

DOWN

NOTE: OSD stands for “ ON SCREEN DISPLAY ”.

NOTE: Most people will not adjust the following functions and will go directly to Page 18 for basic play.

SELECT

BUTTON

LEFT

RIGHT

UP

DOWN

NOTE: The factory settings for LANGUAGE is English.

IB-DVD-2002-WC-ZR-E-V1

Advertising