Logitech Harmony One - Manual (Page 27)

7
Maintaining your Harmony One
Your Harmony One contains internal software, called firmware. The remote’s firmware is
similar to your computer’s operating system.
Logitech updates the firmware for your remote to ensure you’re always getting the most
from your Harmony One. Generally, when you connect your remote to your computer
the Harmony Remote Software updates your remote automatically if new firmware is
available.
However, sometimes you may need to update the firmware manually.
To upgrade your Harmony One firmware:
Remove your Harmony from the charging station.
Connect your Harmony to your computer using the USB cable.
Start the Harmony Remote Software.
Click Downloads.
Click Firmware.
Follow the online instructions.
1.
2.
3.
4.
5.
6.
Upgrading your Harmony One firmware
After you finish making any changes to your Harmony One’s configuration, you should test
the new set up to ensure everything is working the way you expect. This testing process
is the same as the one you did when you set up your Harmony One for the first time. For
more detailed information, see
Testing your setup .
Testing your remote settings after a software upgrade
When you upgrade to a newer model Harmony, you can transfer the configuration from
your old remote to your new remote.
To upgrade to a new model Harmony remote:
From the Harmony Remote Software:
Click Remote Settings.
Click Manage Remotes.
Click Replace.
Follow the online instructions.
1.
2.
3.
4.
Upgrading to a new Harmony remote