LG LRM-519 User Manual

Page 22

Advertising
background image

22

Connect the IR control cable

Digital Cable Set-Top Box/

Satellite Receiver

Recorder

Front

1.

On the Recorder, connect the mini-jack of the IR control cable to the

IR port.

2.

On the IR control cable, attach the adhesive tape (included) to the

flat surface just below of the blaster on the IR control cable.

3.

On the digital cable set-top box or satellite set-top box, locate the

remote control receiver/sensor.

The remote control receiver/sensor is usually behind a small window

on the front panel of the set-top box. If you cannot locate the

receiver, shine a flashlight along the front of the set-top box. Refer

to the set-top box documentation or contact your cable service or

satellite service provider for more information.

4.

Place the IR control cable blaster in front of the remote control

sensor and press the top of the blaster (with the adhesive tape) to

the surface below the set-top box.

OR

Connect the serial data control cable

Satellite Receiver

Recorder

1.

On the satellite set-top box, connect the serial data cable to the

9-pin serial port.

2.

On the Recorder, connect the mini-jack to the SERIAL port.

Advertising