LG LRM-519 - Manual (Page 24)

24
TOS cable
OPTICAL IN
Recorder
Entertainment Center
1. On the Recorder, connect an optical audio cable (not included) to
the DIGITAL OUT – OPTICAL connector.
2. On your home entertainment center amplifier/receiver or your TV,
connect the optical audio cable to the Optical In connector.
Connect to the Microsoft ® Program Guide service
To connect to the Internet to receive daily updates for the Microsoft
Program Guide service, the Recorder uses a broadband or dial-up
connection. For broadband service, you can connect the Recorder to
a wired network (Ethernet) or wireless network (802.11a, 802.11b, or
802.11g).
For information about the Microsoft Program Guide service, see
The Microsoft ® Program Guide in Appendix A.
Connect to a wired network (Ethernet)
Wired network connection
Wall Outlet
Router/Cable Modem
ETHERNET
ETHERNET
OR
1. Connect the Ethernet cable to an Ethernet port in the wall, a router
or a cable modem.
2. On the Recorder, connect the Ethernet cable to the ETHERNET port.