LG LRM-519 - Manual (Page 9)

9
LG LRM-519 Front Panel and Rear Panel
Disc Tray:
Insert a
DVD or
CD here.
POWER:
Turns the
Recorder on and
off. A blue light
appears when
the Recorder is
turned on.
OPEN/CLOSE:
Opens or
closes the
disc tray.
(Play):
Play the
DVD or CD
inserted
into the
disc tray.
DVD PLAY:
Indicates
a DVD is
playing.
HDD REC.:
Indicates a
show is
being
recorded
to the hard
disk drive.
(Pause):
Pause play-
back of the
DVD or CD.
(Stop):
Stops play-
back of the
DVD or CD.
HDD PLAY:
Indicates a
recorded
show stored
on the hard
disk drive
is playing.
DVD REC.:
Indicates a
recorded
show is
being
copied to
a DVD.
Display Window:
Shows the current
status of the
Recorder.
ANT.IN:
Connect
VHF/UHF/
CATV TV
service.
RF BYPASS:
Passes
through the
ANT.IN signal.
S-VIDEO OUT:
Connect to
a TV with an
S-Video Input.
S-VIDEO IN:
Connect a dig-
ital cable or
satellite set-top
box with an
S-Video cable.
AUDIO IN:
Connect the
audio output
of a digital
cable or
satellite set-
top box with
audio cables.
VIDEO IN:
Connect the
video output
of a digital
cable or
satellite set-
top box with
a video cable.
AUDIO OUT:
Connect to a
TV with audio
inputs.
VIDEO OUT:
Connect to a
TV with video
inputs.
COMPONENT
OUT: Connect
to a TV with
component
(Y/Pb/Pr)
inputs and
audio inputs.
DIGITAL OUT –
COAXIAL:
Connect to dig-
ital (coaxial) audio
equipment.
DIGITAL OUT –
OPTICAL:
Connect to dig-
ital (optical) audio
equipment.
COMPOSITE/
480i/480p: Set
to COMPOSITE
if using a video
cable/S-Video
cable to connect
to the TV. Select
480i/480p if us-
ing component
cables.
CONTROL – IR:
Connect the IR
control cable (if
used).
CONTROL – SERIAL:
Connect the serial
data control cable
(if used).
ETHERNET:
Connect to
an Ethernet
network.
USB:
Connect USB
2.0 drives or
a USB wire-
less network
adaptor.
PHONE: Con-
nect a phone
cable for dial-
up connections.
Power cord:
Connect the AC
power cord.