Lantronix EDS Device Servers EDS16PR - Manual (Page 72)

7: Network, Line, Tunnel, and Terminal Settings
EDS Device Servers User Guide 72
Terminal Page
Clicking the Terminal link in the menu bar displays the Terminal page. This page
displays configuration settings for the terminal on a serial line and lets you change them
as necessary.
To select a terminal:
From the drop-down list at the top of the page, select the line that is connected to the
terminal you want to configure.
Figure 7-13. Terminal Page
Terminal Page
Terminal Page
Settings Description
Terminal Type
Enter text to describe the type of terminal. The text will be sent to a
host via IAC.
Note: IAC means “interpret as command.” It is a way to send
commands over the network such as send break or start
echoing.
Login Connect
Menu Select the interface to display when the user logs in. Choices are:
Enabled = displays the Login Connect Menu.
Disabled = displays the CLI