Setting up the lacinema black record, Step 1: connect to tv, Lacinema black record – LaCie LaCinema Black Record User Manual
Page 14: User manual
LaCinema Black RECORD
Setting Up the LaCinema Black RECORD
User Manual
page 14
Setup consists of six steps:
✦
STEP 1: Connect to TV (section
)
✦
STEP 2: Connect to Set-Top Box or Digital Camcorder (Op-
tional) (section
✦
STEP 3: Connect the Power Supply (section
)
✦
STEP 4: Turning on the TV (section
✦
STEP 5: Complete the Installation Wizard (section
)
✦
STEP 6: Connect to Your Network (section
3.1. STEP 1: Connect to TV
The LaCinema Black RECORD supports different ways of connect-
ing to televisions. From the following methods, choose the setup
that matches the ports on your television or receiver:
✦
HDMI (section
)
✦
Component (section
✦
In each of the above connection methods, it is possible to con-
nect the LaCinema Black RECORD to home theater systems by
plugging an S/PDIF cable (not included) to your digital amplifier
via the digital optical audio connector (see section
for details.
The chart at right illustrates the qualities made possible by the
different connection methods.
TECHNICAL NOTE:
The connectors on the rear of your TV may
not appear exactly the same as shown below. Please read the la-
bels next to the connectors carefully to ensure correct connections.
continued on the next page >>
3. Setting Up the LaCinema Black RECORD
Definition
Connection
Max Display
Resolution
High
Definition
HDMI
1080i
Component
1080i
Standard
Definition
SCART RGB
576p
Composite
576p