Push button start system, Driving – Lincoln 2011 MKX User Manual

Page 212

Advertising
background image

• Make sure the gearshift lever is in

P (Park).

Push button start system

Your vehicle is equipped with the
push button start system. You can
start your vehicle by pressing the
start button in combination with the
brake pedal rather than using a key.
The start button is located on the
instrument panel to the right of the
steering wheel.

In order to operate the push button
start system and start the vehicle,
your Intelligent Access key (IA key)
must be present inside the vehicle.

1. Press the START/STOP button (for any length of time) while applying
the brake pedal. Your vehicle has a computer assisted cranking system
that assists in starting the engine. After releasing the button, the engine
may continue cranking for up to 10 seconds or until the vehicle starts.
Note: You can start the engine from any ignition mode. Note: The
indicator light on the start button will illuminate when the vehicle is in
on mode and when the engine is started.

2. After idling for a few seconds, release the parking brake, apply the
brake, shift into gear and drive.

There may be areas inside your vehicle where the IA key is not detected.
If the message NO KEY DETECTED appears on your message center

Driving

212

2011 MKX (mkx)
Owners Guide, 1st Printing
USA
(fus)

Advertising