Using adaptive cruise control, Setting adaptive cruise control, Driver controls – Lincoln 2011 MKX User Manual

Page 70

Advertising
background image

WARNING: Do not use in poor visibility, specifically fog, rain,
spray or snow.

Using adaptive cruise control

Note: It is the drivers responsibility to stay alert, drive safely and be in
control of the vehicle at all times.

The controls for using your cruise
control are located on the steering
wheel.

SET: Press to set a speed or to
change the set speed.

RES/CNCL (Resume/cancel):
Press to resume or cancel a set
speed.

ON/OFF: Press to turn the system
on or off.

GAP: Press to change the distance between your vehicle and the vehicle
in front of you.

Setting adaptive cruise control

1. Press and release ON. The
message center will display the
gray

ACC indicator light, current

gap setting and SET.

2. Accelerate to the desired speed.

3. Press SET upward and release.
The vehicle speed will be stored in the memory and the message center
will display a green

ACC indicator light, current gap setting and

desired set speed.

4. Take your foot off the accelerator pedal.

5. A lead vehicle graphic will
illuminate if there is a vehicle
detected in front of you.

SET

RES

CNCL

ON

OFF

GAP

Driver Controls

70

2011 MKX (mkx)
Owners Guide, 1st Printing
USA
(fus)

Advertising