Lakeshore Learning Materials 647 - Manual (Page 25)

Lake Shore Model 647 Magnet Power Supply User’s Manual
Setup & Connections 2-9
2.7 POST-INSTALLATION INSTRUCTIONS
The MPS is electrically and mechanically inspected and operationally tested prior to shipment. It should be
damage-free and in perfect working order upon receipt. To confirm this, visually inspect the instrument for
damage and test it electrically to detect any concealed damage upon receipt. Study the entire MPS User’s
Manual before attempting to run the unit. See Chapter 3 for any questions on front panel control operation.
2.8 SYSTEM SHUTDOWN AND REPACKAGING FOR STORAGE OR SHIPMENT
Follow these general guidelines for system shutdown for storage or reshipment. If returning something, call
Lake Shore first to obtain a Return Goods Authorization (RGA) Number.
1. Turn off the power to all instruments. Unplug the power cord.
2. Remove or disconnect any interface cables and the magnet current output cables.
3. Repack the MPS upside down in the original box. If returning the MPS to Lake Shore and original box is
unavailable, please call Lake Shore for a replacement box.
4. Label the box for storage or shipment.
2.9 RETURNING EQUIPMENT TO LAKE SHORE
To return the MPS for repair or replacement, obtain a Return Goods Authorization (RGA) number from a
factory representative before returning the instrument to our service department. When returning an
instrument for service, Lake Shore requires the following information before attempting any repair:
1. Instrument model and serial number
2. User's name, company, address, and phone number
3. Malfunction
symptoms
4. Description of system
5. Returned Goods Authorization number
Consult the factory for shipping instructions. Ship the MPS upside down in the original shipping box.