Lennox Hearth PURA JX20 - Manual (Page 6)

5
en
G
li
sh
Jabra JX20 Pura
Charging your headset from your deskstand:
What you see What this means
led off no device in deskstand
st . led solid device in deskstand
st . led solid, 2nd . led pulsing 0-25% charged
+2 led solid, 3rd . led pulsing 25-50% charged
+2+3 led solid, 4th . led pulsing 50-75% charged
+2+3 +4 led solid, 5th . led pulsing 75-00% charged
all led´s solid fully charged
Check Battery status:
• When you are not in a call, tap either volume button .The led
will flash in accordance with the aC adapter/usb charger
sequence above .
turninG your headset on and off
• Gently turn the earpiece 90° clockwise to turn on the headset
(see fig . ) .
• Gently turn the earpiece 90° anti-clockwise to turn off the
headset (see fig . ) .
PairinG it With your Phone
The first time you turn on your Jabra JX20 Pura it will automatically
enter pairing mode . In this case skip directly to point 2 below .
When pairing with a second device, or if you need to pair
manually, start with point  below .
1. Put the headset in pairing mode:
• Turn the headset on .
• Press and hold the answer / end button until the led on the
back shines continuously .