LaCie FireWire 800 - Manual (Page 12)

LaCie d2 Quadra
• D
esign by
n
eil
P
oulton
Getting Connected
User Manual page 12
2. Getting Connected
Installing your LaCie d2 Quadra is easy thanks to LaCie Setup
Assistant. Install your d2 Quadra in three easy steps:
✦ Step 1 – Turn the drive on (section 2.1)
✦ Step 2 – Connect an interface cable (section 2.2)
✦ Step 3 – Run LaCie Setup Assistant to format your drive for
optimal performance with your system (section 2.3)
IMPORTANT INFO: Do not connect more than one interface
at a time. To switch interfaces, follow the steps in section 2.6.
Switching Interfaces .
IMPORTANT INFO: Please follow the setup steps in the or-
der they are given to ensure that the LaCie hard disk volume
mounts correctly on your computer.