Lenoxx Electronics CD-1492 - Manual (Page 19)

CD TROUBLE SHOOTING GUIDE
PROBLEM POSSIBLE CAUSE AND REMEDY
CD does not rotate
Is AC power cord plugged into outlet? Does outlet
have power? Check outlet with a lamp or other
appliance.
Make sure the FUNCTION switch is in CD position.
If using the set on batteries - make sure you
unplug the AC cord from the back of the set and
outlet.
- Also check if batteries are fresh.
(The AC SOCKET in the back of the set has a
switch which shuts off battery power if cord is plugged
into the back of the set).
CD does not play
If the Display shows “ ”. This means the CD disc
is upside down. Open the door, remove the CD, flip it
over and insert correctly. The printed side up.
1. Is the lens very dirty? (Gently clean lens with a
soft cloth or CD cleaner disc available at most
Hi-Fi stores.)
2. Is POWER/BATT. lamp ON?
3. Is the FUNCTION switch in CD position?
4. Is the track number flashing? (press PLAY button) The
track number will flash in pause and be steady
on during play.
Disc skips parts of
songs
Disc has a defect. Try cleaning the disc with a
clean rag or disc cleaner. If this does not help,
the disc may be damaged.
Is the lens very dirty? Gently clean the lens.
Speakers have no
sound
1. Are the speakers plugged in? Check the back of
the set and see page 5.
2. Is VOLUME CONTROL at MIN? Adjust the
VOLUME CONTROL.
3. Is headphone in jack? Remove headphones to
power speakers.
4. Make sure AC cord is plugged in or unplugged
from back of set if using batteries.
5. Make sure batteries are fresh.
NOTE: The CD player and the cassette decks are fitted with self-lubricating
bearings which must not be oiled or greased.
TO CLEAN THE CD PLAYER
A chamois soft cloth very slightly moistened with water is sufficient for cleaning the
housing of the set and the enclosures.
NOTE: Your CD player may not play when bringing it from a cold place (outdoors)
to a warm place (indoors). Because of large temperature differences,
condensation may have formed on the lens of the laser. This will disappear
after some time (when the mechanism warms up).
18 IB-CD1492(AD)-WM-E-031402
IB-CD1492(AD)-W-E-031402.p65 3/19/02, 2:17 PM 19