Lexmark 1500 Series User Manual

Page 103

Advertising
background image

Check memory card placement

Make sure you inserted the memory card into the correct slot. For more information, see “Inserting a memory card”
on page 43
.

Check to see if the memory card is damaged

Check to see if there is no obvious damage to the memory card. Remove memory cards properly from the printer
to avoid corruption of data.

Check the file types stored on the memory card

Make sure the file types stored on the memory card are supported by the programs installed on your computer.

Make sure the USB cable is connected

1

Check that the USB cable is connected to the computer. The USB port on the back of the computer is marked

by the

USB symbol. Plug the long, flat end of the USB cable into this port.

2

Make sure that the smaller, more square end of the USB cable is plugged into the back of the printer.

3

Check that the USB cable is not damaged and that the

light is on.

Check the network connection

If the printer and computer are connected over a network, make sure that the correct host and device are
communicating. Select the correct printer from the computer.

Photos do not transfer from a memory card across a wireless network

These are possible solutions. Try one or more of the following:

Select the printer on your wireless network

If you have more than one printer and use Windows, you must select your wireless network printer.

1

Do one of the following:

In Windows Vista, click

ΠControl Panel ΠPrinters.

In Windows XP and earlier, click Start

ΠSettings ΠPrinters and Faxes.

2

From the list shown, select the printer on your wireless network.

Note: To select the printer, right click the printer, and then select Set as Default Printer.

3

Insert the memory card in the printer.

4

Follow the instructions on the computer screen.

Check memory card placement

Make sure you inserted the memory card into the correct slot.

Check memory card type

Make sure that the type of memory card you are using can be used in the printer.

Check to see if the memory card is damaged

Check to see that there is no obvious damage to the memory card. Remove memory cards properly from the printer
to avoid corruption of data.

103

Advertising