Lexmark 1500 Series User Manual
Page 27
14
If necessary, deselect the The key is provided for me automatically check box.
15
In the Network Key box, type in a security code.
16
Write down the security code you chose so you can refer to it when running the wireless setup. Make sure you
copy it down exactly, including any capital letters.
Note: For more information about passwords (security keys), see “Check your security keys” in the “Wireless
troubleshooting” section of the “Troubleshooting” chapter.
17
Type the same security code in the Confirm network key box.
18
Select the This is a computer-to-computer (ad hoc) network; wireless access points are not used. check
box.
19
Click OK twice to close the two open windows.
20
It may take a few minutes for your computer to recognize the new settings. To check on the status of your
network:
a
Right-click the Wireless Network Connections icon.
b
Select View Available Wireless Networks.
•
If the network is listed but the computer is not connected, select the ad hoc network and then click the
Connect button.
•
If the network does not appear, wait a minute and then click the Refresh network list button.
21
Click Programs or All Programs
Lexmark 1500 Series.
22
Click Wireless Setup Utility.
Note: You may be prompted to connect the printer to the computer again using the installation cable as part of
the setup process.
23
Follow the prompts on the computer screen.
24
Store your network name and security code in a safe place for future reference.
Adding a printer to an existing ad hoc wireless network using Windows
1
Click Programs or All Programs
Lexmark 1500 Series.
2
Click Wireless Setup.
3
Follow the instructions on the computer screen.
27