Lexmark 1500 Series - Manual (Page 44)

3 When the computer recognizes that a memory card is installed, the message New photos have been
found. What do you want to do?
appears.
If the printer does not read the memory card, remove and reinsert it. For more information, see “Memory card
troubleshooting” on page 102.
Note: The computer recognizes one active memory card at a time from your printer. If you insert more than one
memory card, a message appears on the display prompting you to remove the memory card that is not in use.
Inserting a flash drive
1 Insert the flash drive into the PictBridge port on the front of the printer.
Note: An adapter may be necessary if your flash drive does not fit directly into the port.
2 Wait for the computer to recognize that a flash drive is installed. When the flash drive is recognized, the message
New photos have been found. What do you want to do?
appears.
If the printer does not read the flash drive, remove and reinsert it.
Warning: Do not touch cables, any network adapter, the flash drive, or the printer in the area shown while
actively printing, reading, or writing from the flash drive. A loss of data can occur. Also, do not remove the flash
drive while actively printing, reading, or writing from the flash drive.
44