Checking your network name (windows users only), Ping the access point – Lexmark 1500 Series User Manual

Page 79

Advertising
background image

Check the installation cable

1

Disconnect the installation cable and check it for any obvious damage.

2

Firmly plug the rectangular end of the USB cable into the USB port of the computer.

The USB port is marked with the

USB symbol.

3

Firmly plug the square end of the USB cable into the USB port on the back of the printer.

4

Cancel the software installation.

5

Click Programs or All Programs

ΠLexmark 1500 Series.

6

Click Wireless Setup Utility.

7

Follow the prompts on the computer screen to reinstall the software.

Checking your network name (Windows users only)

Make sure your network does not have the same name as another network near you. For example, if you and your
neighbor both use a manufacturer's default network name, your printer could be connecting to your neighbor's
network.

If you are not using a unique network name, consult the documentation for your wireless access point (wireless
router) to learn how to set a network name.

If you set a new network name, you must reset the printer and computer SSID to the same network name.

To reset the computer network name, see the documentation that came with your computer.

To reset the printer name:

1

Click Programs or All Programs

ΠLexmark 1500 Series.

2

Click Wireless Setup Utility.

3

Follow the instructions on the computer screen, and enter the new network name when prompted.

Ping the access point

1

If you do not already know it, find the IP address of the wireless access point (wireless router).

a

Do one of the following:

In Windows Vista, click

ΠAll Programs ΠAccessories ΠCommand Prompt.

In Windows XP, click Start

ΠPrograms or All Programs ΠAccessories ΠCommand Prompt.

b

Type ipconfig.

c

Press Enter.

The “Default Gateway” entry is typically the wireless access point (wireless router).

The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100.

2

Ping the wireless access point (wireless router).

a

Do one of the following:

In Windows Vista, click

ΠAll Programs ΠAccessories ΠCommand Prompt.

In Windows XP, click Start

ΠPrograms or All Programs ΠAccessories ΠCommand Prompt.

b

Type ping followed by a space and the IP address of the wireless access point (wireless router). For
example:

ping 192.168.0.100

c

Press Enter.

79

Advertising