Lexmark C762 - Manual (Page 131)

PJL
3-52
Printer Unique Variables for PostScript Emulation
The following variables are unique in some printers and are supported in PostScript
emulation only.
The [command modifier:value] parameter should be specified as LPARM : POSTSCRIPT .
For example:
@PJL SET LPARM:POSTSCRIPT LPICTUREGRADE=ON[<CR>]<LF>
To determine which variables your printer supports, see Table B-6 on page B-13.
Printer Unique LRESOURCE Variables
Use the following variables when additional storage devices are installed.
The [command modifier:value] parameter of the DEFAULT, INQUIRE, DINQUIRE,
and SET commands must be specified as LRESOURCE:"device:filename.filetype" .
For example:
@PJL DEFAULT LRESOURCE : "device:filename.filetype"LDESCRIPTION="my
description"[<CR>]<LF>
Values for "device:filename.filetype" are:
device flash , flash1 , disk , or disk1 (case insensitive)
filename A unique identifier for a file, such as the macro ID for a PCL
macro, the symbol set ID for a PCL symbol set, the font ID for a
PCL font, or the actual file name for data, Type 1 fonts, and
demo files as shown on the Directory. The
filename is case
sensitive.
filetype The identifier that categorizes the file, such as p5macro for PCL
macros or p5symset for PCL symbol sets
Table 3-8: Printer Unique Variables for PostScript Emulation
Variable Function Selections
Factory
Default
LPICTUREGRADE PictureGrade ON, OFF ON
LPSFONTPRIORITY Font Priority RESIDENT, FLASHDISK RESIDENT