Lexmark C762 - Manual (Page 148)

PJL
3-69
Intervention required:
print cartridge missing 40021 Insert Print Cartridge FALSE
Intervention required:
paper jam 40022 2xx Paper Jam FALSE
Intervention required:
check tray connection 40027 Check Tray <source #> Connection FALSE
Intervention required:
install tray x or cancel job 40027 Install Tray x or Cancel Job FALSE
Intervention required:
envelope feeder detached 40028 Reattach Envelope Feeder FALSE
Intervention required:
multipurpose feeder detached 40028 Reattach MP Feeder FALSE
Intervention required:
install envelope feeder or cancel job 40028 Install Env Feed or Cancel Job FALSE
Intervention required:
reattach output bin 40029 Reattach Output Bin <bin #> FALSE
Intervention required:
reattach bins 40029 Reattach Bins <bin #x - bin #y> FALSE
Intervention required:
install bin x or cancel job 40029 Install Bin x or Cancel Job FALSE
Intervention required:
check finisher installation 40029 Check Finisher Installation FALSE
Intervention required:
check mailbox installation 40029 Check Mailbox Installation FALSE
Intervention required:
tray configuration error 40030 33 Tray x Config Error FALSE
Intervention required:
input configuration error 40030 58 Input Config Error FALSE
Intervention required:
too many trays attached 40030 58 Too Many Trays Attached FALSE
Intervention required:
too many bins attached 40030 58 Too Many Bins Attached FALSE
Intervention required:
too many disks installed 40030 58 Too Many Disks Installed FALSE
Intervention required:
too many disks installed 40036 58 Too Many Disks Installed FALSE
Table 3-14: PJL Message for Attendance Conditions
Printer State Status Code Display String Online Status
1
XXXX represents a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow and Black cartridges,
respectively. For this message, the values for XXXX are returned to indicate which ink cartridges are defective.
2
<d> represents a one-letter designator for each door labeled on the printer.
3 <c> represents a one-letter designator for each cover labeled on the printer.
Note: The Display String is returned in the current language. A display string that is returned is truncated to the DISPLAY
CHARACTER SIZE returned in INFO CONFIG.