Postscript – Lexmark C762 User Manual

Page 227

Advertising
background image

PostScript

4-50

DeviceRenderingInfo
(continued)

dictionary

AutoMediaType

is a boolean that controls the MediaType entries in the

InputAttributes

dictionary in the pagedevice dictionary.

True

MediaType entries in the InputAttributes dictionaries cannot be
modified by the user. The values are confined to values known by
the printer operating system.

False

MediaType entries in the InputAttributes dictionaries can be
modified by the user.

EdgeToEdge

is a boolean which determines if there should be an unprintable

area on the page.

True

Print to the edge of the paper.

False

Do not print to the edge of the paper (default).

DefaultPoliciesPageSize

is an integer which equals the

PageSize

parameter in

the

Policies

dictionary unless

PageSize

is set to 23; in that case,

DefaultPoliciesPageSize equals the

PageSize

parameter value before it was set

to 23 or equals 0 if the

PageSize

parameter is initialized to 23. For more

information on

PageSize

, see page 4-58.

SubstituteSize

allows for the substitution of A4- and Letter-size print materials,

and A3- and 11x17 inch-size print materials for each other when one size is not
installed.

Note:

For size substitution to occur, the substituted print material and the

requested print material must be of the same paper type.

The following values are supported:

/Off

No size substitution is performed.

/A4-Letter

If A4 is requested but not installed and Letter is installed, Letter
is substituted for A4. Or, if Letter is requested but not installed
and A4 is installed, A4 is substituted for Letter.

/A3-11x17

If A3 is requested but not installed and 11x17 is installed,
11x17 is substituted for A3. Or, if 11x17 is requested but not
installed and A3 is installed, A3 is substituted for 11x17.

/All

Both size substitutions are permitted.

Note:

When the size substitution occurs, the page is scaled to the size of the

requested print material.

The DefaultPoliciesPageSize value is used as the effective policy when:

• The

SubstituteSize

parameter is not set to /Off and a size substitution cannot

be performed.

• The

PageSize

parameter in the

Policies

dictionary is set to 23.

Notes:

• If

SubstituteSize

is set to /Off, the effective policy is the value of

PageSize

.

• If

SubstituteSize

is not set to /Off and a size substitution is possible, the

effective policy is 3.

Table 4-8: Page Device Parameters (Continued)

Key

Type

Definition

Advertising
This manual is related to the following products: