Lexmark C762 - Manual (Page 274)

Memory
6-1
CHAPTER 6: Flash Memory and Disk
Flash memory and disk devices are used to store permanent fonts, macros, and
symbol sets. The disk device is also used to buffer print jobs, collate large jobs, and
store job statistics. Unlike RAM memory, these devices retain the following information
when the printer is powered off, or when the printer switches languages:
• PCL emulation permanent bitmapped and scalable fonts
• PCL emulation permanent macros
• PCL emulation symbol sets
•
PostScript Type 1 fonts
•
Files created using the PostScript emulation file operators
• Demonstration files
Some printers have connectors that let you install optional flash memory or a disk
device; other printers may offer one or the other of these devices as a standard
feature. See your printer documentation for more information.
When first installed in the printer, the flash memory or disk may be unformatted. You
must format the device before you download resources. A message displays on the
printer operator panel or through MarkVision Professional if the device is unformatted.
Warning: When you format flash memory or a disk, all information currently stored
on the device is lost.
If flash memory or a disk becomes full while downloading resources, a message
displays on the printer operator panel or through MarkVision Professional. The file
being downloaded is not saved unless room is available to store the entire file.