Lexmark C762 User Manual

Page 67

Advertising
background image

PCL

2-55

Table 2-25: Picture Frame

Command / Parameters

Function / Result

ESC

*c#X

# of Decipoints: 0 to 32767

(1 Decipoint = 1/720 inch)

Picture Frame Horizontal Size (in Decipoints)

Specifies the horizontal dimension of the picture frame used when
printing a GL/2 plot.

ESC

*c#Y

# of Decipoints: 0 to 32767

(1 Decipoint = 1/720 inch)

Picture Frame Vertical Size (in Decipoints)

Specifies the vertical dimension of the picture frame used when
printing a GL/2 plot.

ESC

*c0T

0

Set Anchor Point to Cursor Position

Set Picture Frame Anchor Point

Sets the position of the picture frame anchor point to the cursor
position. The picture frame anchor point defines the location of the
upper left corner of the picture frame.

ESC

*c#K

Size in inches: 0 to 32767

GL/2 Horizontal Plot Size

Specifies the horizontal scaling factor used when importing an
image into the picture frame.

ESC

*c#L

Size in inches: 0 to 32767

GL/2 Vertical Plot Size

Specifies the vertical scaling factor used when importing an image
into the picture frame.

ESC

%#B

0

Use Previous GL/2 Pen Position

1

Use Current PCL Cursor Position

Enter GL/2 Language

Exits PCL emulation and uses GL/2 commands to print.

ESC

%#A

0

Use Previous PCL Cursor Position

1

Use Current GL/2 Pen Position

Enter PCL Emulation

Exits GL/2 mode and uses PCL emulation commands to print.

Table 2-26: Miscellaneous Commands

Command / Parameters

Function / Result

ESC

&s#C

0

Enable

1

Disable (Default)

End-Of-Line Text Wrap

Enabling End-Of-Line Text Wrap moves portions of lines that extend
into the unprintable area to the next line. Disabling drops the portion
extending into the unprintable area.

ESC

Y

Display Functions On

Prints all control codes and escape sequences rather than executing
them.

Notes:

• To prevent characters from falling outside the right margin (and not

printing), enable End-Of-Line Text Wrap (

ESC

&s0C).

• To see the control characters and other blank codepoints in symbol

set Roman8 (8U), set the symbol set to PC-8 (10U).

Advertising
This manual is related to the following products: