Kernel commands, Kernel commands -2, Universal exit language command – Lexmark C762 User Manual

Page 81

Advertising
background image

PJL

3-2

Notes:

Parameters enclosed in square brackets ([ ]) are optional and not required
for command execution.

The PJL interpreter requires uppercase for the

@PJL

prefix for all PJL com-

mands

except

the Universal Exit Language (UEL) command. The rest of

the PJL command is not case sensitive. The UEL command is case sensi-
tive.

All PJL commands except UEL must be terminated with a line feed char-
acter (<LF>).

Kernel Commands

UNIVERSAL EXIT LANGUAGE Command

The Universal Exit Language (UEL) command terminates the current printer language
and allows dynamic switching into PJL.

Syntax:

<ESC>%-12345X

Notes:

If the printer receives this command while in PCL emulation, it performs a
Printer Language Reset (

ESC

E) before exiting PCL emulation.

If the printer receives this command while in PostScript emulation, it performs
an End-of-Job (EOJ) command before exiting PostScript emulation (Ctrl-D).

The PJL commands must immediately follow the UEL command (that is, the

X

in the

UEL syntax must be immediately followed by the

@PJL

of the next PJL command).

Advertising
This manual is related to the following products: