Setting smartswitch for different interfaces, Printer job language, Setting smartswitch for different interfaces -2 – Lexmark C762 User Manual

Page 272: Printer job language -2, Languages

Advertising
background image

Languages

5-2

Setting SmartSwitch for Different Interfaces

You can customize your printer so that particular print jobs are sent to particular
interfaces. For example, you may want to send all PostScript emulation jobs to the
network interface and all PCL emulation jobs to the parallel interface. You can do so
by choosing different languages for each interface from the printer operator panel or
through MarkVision Professional and setting the selected language to On for the
interface you want. See your printer documentation for more information.

If you have turned off a particular language for an interface, but then decide to send a
job to that interface using that language, you

must

begin the job with a PJL command

to override the settings you made from the printer operator panel or through
MarkVision Professional. For example, if you set

PCL emulation

to

Off

for the serial

interface and later decide to send a job in that language through that interface, you
must preface the job with a PJL command to override the Off setting. Be sure to end
the job with a Universal Exit Language (UEL) command, which is described on
page 3-2.

Printer Job Language

For details on Printer Job Language (PJL) and the PJL ENTER LANGUAGE
command, see “ENTER LANGUAGE Command” on page 3-3.

Advertising
This manual is related to the following products: