Wired network setup, 27 – wired network setup – LG HB906TA User Manual

Page 27

Advertising
background image

Connecting

27

C

onnecting

2

Wired Network Setup

If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.

Preparation

Before setting the wired network, you need to
connect the broadband internet to your home
network.
1. Select [Connection Setting] option in the

[Setup] menu then press ENTER (b).

2. Use W/S/A/D to select the IP mode

between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.

If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/

A/D and numerical buttons. If you make a

mistake while entering a number, press CLEAR
to clear the highlighted part.

,

Note

3. Select [OK] and press ENTER (b) to apply

network settings.

4. The player will ask you to test the network

connection. Select [OK] and press ENTER (b) to

complete the network connection.

5. If you select [Test] and press ENTER (b) at

step 5 above, the network connection status is
displayed on the screen.
You can also test it on the [Connection Status]
in the [Setup] menu.

Advertising