Liebherr HC1001 - Manual (Page 4)

u Screw in ball stud Fig. 3 (3) together with the soft stop
mechanism Fig. 3 (2) in the fastening hole.
u Re-attach all covers Fig. 2 (5,6,7,8) .
4 Kitchen Cabinet Construction
This is a fully integrated appliance which means that it is
fully enclosed by a kitchen cabinet. This type of cabinet
must be carefully constructed using the proper dimensions
and it must provide proper ventilation to ensure proper ap-
pliance operation.
Make a separate kitchen cabinet
for each appliance for Side-by-
Side installations.
Consider having a professional install the appliance in your
kitchen cabinet.
4.1 Kitchen Cabinet Airflow
Fig. 4
- There must be a ventilation space at least 31 in 2
(200 cm 2 ) at the airflow inlet Fig. 4 (1) and at the airflow
outlet Fig. 4 (2) .
- The top ventilation space can be either directly over the
appliance Fig. 4 (2) or next to the ceiling over a cabinet
Fig. 4 (3) , or through a vent installed in a soffit Fig. 4 (4) .
Fig. 5
- There must be a clear ventilation space (without any ob-
structions) of at least 1-1/2 in. (38 mm) at the back of the
kitchen cabinet.
u Observe the above ventilation dimensions.
Ventilation through the cabinet base at the bottom can be
achieved by installing the provided ventilation grille Fig. 6 (3)
or via a ventilation opening of at least 31 in 2 (200 cm 2 ). When
using the provided ventilation grille Fig. 6 (3) , please proceed
as follows:
Kitchen Cabinet Construction
4