How to install the projector using the tripod, Kensington security system – LG HX301G User Manual

Page 13

Advertising
background image

Installing and Composition

13

• This projector has a Kensington Security System Connector on the side panel. Connect the Kensington Security System

cable as below.

• For the detailed installation and use of the Kensington Security System, refer to the user’s guide included with the

Kensington Security System set. And for further information, contact

http://www.kensington.com, the internet homepage

of the Kensington company that deals with expensive electronic equipment such as notebook PCs or projectors.

• The Kensington Security System is an optional item.

Kensington Security System

* You can install this projector using a tripod for the camera. You can assemble the projector instead of the camera on camera

tripod.

* When stabilizing the tripod, we recommend using the locking bolt of the standard size 4.5 mm or less.The maximum size

allowed for the locking bolt is 6.5 mm.(If it is longer than the maximum allowed size, it may damage the projector.)

How to install the projector using the tripod

+

=

Camera Tripod

Part connected to the tripod

Finished condition when projector is install on the tripod

Part connected to the projector

Bottom side of Projector

Advertising
This manual is related to the following products: