LG 26LC5 - Manual (Page 13)

11
PREP
AR
A
TION
STAND INSTALLATION
(Only 42/50PC3*)
Figures shown here may be slightly different from your set.
W Wh heen n ccllo ossiin ng g tth hee ssttaan nd d ffo orr sstto orraag gee
First remove the screws in the holes (B)on the bottom of the
stand.And then pull two Hooks (D)of the stand bottom and
fold the stand into the back of the set.
After folding,push two Locks (A)of the stand bottom outward.
NOTE !
■ Place the set with the screen facing down on a cushion or soft cloth as shown in Figures 1.
Before unfolding the stand,please make sure two locks (A)on the bottom of the stand push outward.
■ Pull the stand out as shown above in Figures 2 ~ 3.
After unfolding the stand,please insert and tighten the screws in the holes (B)on the bottom of the stand.
■ When connecting cables to the set,Do not disengage the lock (C).
This may cause the set to fall,causing serious bodily injury and serious damage to the set.
A
C
B
1
2
3 4
■ This feature is not available for all models.
A D
B