Lexmark N5 - Manual (Page 8)

3 Setup
Step 3: Prepare your printer
Unpack and set up your printer. For help, refer to the
instructions that came with your printer.
To help configure your printer on the network:
Do not connect your printer to your computer;
however, if you have already done so, disconnect the
USB or parallel cable.
Do not install the printer software; however, if you
have already done so, you do not need to uninstall it.
1
2
Place the printer next to your printer adapter.
Note: If necessary, disconnect the printer
power supply, and then reconnect it at its
new location.
Make sure the printer power light is on.
Note: Your printer may look different from the
one shown.
3
4