Cleaning the printer – Lennox Hearth PB42 User Manual
Page 35
PB42 Portable Receipt Printer User’s Guide
35
To cold boot the PB42
1
Disconnect the PB42 from power source if externally
powered.
2
Remove the batteries from the PB42.
3
Insert the batteries back into the PB42.
4
Reconnect external power if powered externally.
Cleaning the Printer
To properly maintain your PB42, you should clean it at the
recommended intervals.
To avoid possible personal injury or damage to the printer,
never insert any pointed or sharp objects into the printer.
Use only cleaning agents specified next. Intermec is not
responsible for damage caused by any other cleaning
materials used on this printer. Clean the printer with a
cotton swab saturated with alcohol.
Paper
sensor
Tear bar
Printhead
Platen
roller
PB42 Portable Receipt Printer: Identifying the parts of the PB42 to clean
regularly.