LST Control Module M201E-240 - Manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED M201E-240_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
Description
The Control Module M201E-240 serves to actuate
external devices by means of one normally open and
a separate normally closed relay contact, suitable for
switching 230VAC. Communication to the fi re detec-
tion control panel is established via the ADM loop using
System Sensor/200 protocol.
A status LED indicates the condition of the module.
The addressable control module is supplied in a mo-
dule box for easy wall mounting. Separate terminals
enable the operation of the module with or without the
integrated dual-isolator.
• ADM loop technology with
System Sensor/200 protocol
• One output with dry relay contacts
230VAC
• Status LED
• Setting of module address via
decadic rotary switches
• Supplied with module box (wall-mount
case)
Specifi cations
Operating voltage Supply through loop voltage
Current consumption approx. 510µA (quiescent)
Contacts 1 × NO, 1 × NC
Contact rating 5A/30VDC or 5A/230VAC
Ambient temperature -20°C to +60°C
Dimensions L × W × H 132 Ч 137 Ч 40 (mm)
Colour cream/transparent smoke-coloured
Weight 195g
Approval VdS G202141
Order number 249105
Order name Control Module 1xRel.Out/Anal./200/SS M201E-240