Land Pride Box Scrapers HR35 User Manual
Page 7
5
Introduction
2/14/13
HR3584 & HRL3578 Retractable Box Scraper 305-054M
Introduction
Definitions
Owner Assistance
The Online Warranty Registration or Warranty
Registration card should be completed by the dealer at
the time of purchase. This information is necessary to
provide you with quality customer service.
The parts on your Retractable Box Scraper have been
specially designed by Land Pride and should only be
replaced with genuine Land Pride parts. Contact a Land
Pride dealer if customer service or repair parts are
required. Your Land Pride dealer has trained personnel,
repair parts, and equipment needed to service the
implement.
Serial Number
Model No. _____________Serial No. _______________
For quick reference and prompt service, record model
number and serial number in the spaces provided above
and again on warranty page 17. Always provide model
number and serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for location of your serial number plate.
Serial Number Plate Location
Figure 1
IMPORTANT: A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.
15246
Land Pride welcomes you to the growing family of new
product owners.
This Retractable Box Scraper has been designed with
care and built by skilled workers using quality materials.
Proper assembly, maintenance, and safe operating
practices will help you get years of satisfactory use from
this machine.
Application
The 35 Series Retractable Box Scrapers are designed
and built by Land Pride to meet dirt moving and soil
contouring needs of landscapers, contractors, nurseries,
sod growers, farmers, ranchers and municipalities. Our
Box Scrapers are designed for category I & II 3-Point
hitch mounting on tractors with up to 65 HP.
Land Pride meets a wide range of specific needs by
offering the “Low Back” model HRL3578 with 78" of
working width and the larger cubic foot capacity HR3584
“High Back” model with 84" of working width. Soil
contouring productivity is dramatically increased with
utilization of the hydraulically controlled retractable
scarifier.
The front blade mounted on the moldboard is ideal for
soil redistribution and soil leveling. A second blade
mounted on the hinged rear gate further enhances the
ability of the Box Scraper to redistribute and level soil.
Both the front and rear blades are replaceable and can
be flipped over to extend blade life. The Box Scraper is
used for finishing and fine grading when the hinged rear
gate is bolted in place. Unbolt the rear gate and the Box
Scraper’s front blade will penetrate deeper into the soil.
Place the tractor in reverse and the rear blade can be
used to backfill.
See “Specifications & Capacities” on page 14 and
“Features & Benefits” on page 15 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge from our website at
www.landpride.com.
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.