Internal solutions port, Internal print server, Memory card – Lexmark 280 User Manual
Page 181: Usb/parallel interface card
Internal Solutions Port
If the Lexmark Internal Solutions Port (ISP) does not operate correctly, then these are possible solutions. Try one or
more of the following:
C
HECK
THE
ISP
CONNECTIONS
•
Make sure the ISP is securely attached to the printer system board.
•
Make sure the cable is securely connected to the correct connector.
C
HECK
THE
CABLE
Make sure you are using the correct cable and that it is securely connected.
M
AKE
SURE
THE
NETWORK
SOFTWARE
IS
CONFIGURED
CORRECTLY
For information about installing software for network printing, see the Networking Guide on the Software and
Documentation CD
Internal print server
If the internal print server does not operate correctly, these are possible solutions. Try one or more of the following:
C
HECK
THE
SERVER
CONNECTIONS
•
Make sure the internal print server is attached securely to the printer system board.
•
Make sure you are using the correct (optional) cable and that it is securely connected.
M
AKE
SURE
THE
NETWORK
SOFTWARE
IS
CONFIGURED
CORRECTLY
For information about installing software for network printing, click Additional on the Software and
Documentation CD, and then select the Networking Guide link under Publications on this CD.
Memory card
Make sure the memory card is securely connected to the printer system board.
USB/parallel interface card
Check the USB/parallel interface card connections:
•
Make sure the USB/parallel interface card is securely connected to the printer system board.
•
Make sure you are using the correct cable and that it is securely connected.
Troubleshooting
181