Lexmark 280 User Manual
Page 74
For Macintosh users
1
With a document open, choose File > Print.
If necessary, click the disclosure triangle to see more options.
2
From the print options, Copies & Pages, or General pop-up menu, choose Job Routing.
3
Select your job type (Confidential, Reserve, Repeat, or Verify), and then assign a user name. For a confidential job,
also enter a four-digit PIN.
4
Click Print, and then go to the printer to release the job.
5
From the printer control panel, press the down arrow button until Held jobs appears, and then press .
6
Press the down arrow button until appears next to your user name, and then press .
7
Press the down arrow button until appears next to the job type or job name, and then press .
If you selected a job name, proceed to step 10 on page 74.
8
After selecting your job type, use the keypad to enter your PIN.
If you enter an invalid PIN, the Invalid PIN screen appears.
•
To re-enter the PIN, make sure Try again appears, and then press .
•
To cancel the PIN, press the down arrow button until Cancel appears, and then press .
9
Press the down arrow button until appears next to the job you want to print, and then press .
10
Press the down arrow button until appears next to the number of copies you want to print, and then press
.
Note: Use the keypad to enter a number if necessary.
Printing
74