Lexmark 280 - Manual (Page 82)

200 or 201 paper jam
If paper jams under the photoconductor units, 200.xx Paper jam or 201.xx Paper jam may appear.
1 Open the front door.
Note: To avoid overexposing the photoconductor units, do not leave the front door open longer than 10 minutes.
2 Pull the paper forward if it is lodged under the photoconductor units.
Note: You may need to remove the photoconductor units if the paper is lodged too tightly under them.
3 Remove each photoconductor unit, and place it on a flat surface.
4 Remove the jammed paper, and then replace each photoconductor unit.
5 Close the front door.
6 Press from the printer control panel.
Clearing jams
82