Lexmark 280 - Manual (Page 92)

Supplies menu
Menu item Description
Replace Supply
All
Cyan Photoconductor
Magenta Photoconductor
Yellow Photoconductor
Black Photoconductor
Provides the option to reset the supply counter for the
photoconductor just replaced, or for all photoconductors
Select the photoconductor, and then select Yes or No:
• Select Yes to reset the supply counter.
• Select No to exit.
Note: A supply counter must be reset manually after a
photoconductor is replaced.
Cyan, Magenta, Yellow, or Black Cartridge
Low
Invalid
Replace
Missing or Defective
OK
Uncalibrated
Unsupported
Shows the status of the toner cartridges
Cyan, Magenta, Yellow, or Black Photoconductor
Life Warning
Replace
Missing
OK
Shows the status of the cyan, yellow, and magenta
photoconductors
Black Photoconductor
Life Warning
Replace
Missing
OK
Shows the status of the black photoconductor
Waste Toner Box
Near Full
Replace
Missing
OK
Shows the status of the waste toner box
Fuser
Life Warning
Replace
Missing
OK
Shows the status of the fuser
Transfer module
Life Warning
Replace
Missing
OK
Shows the status of the transfer module
Understanding printer menus
92