Installing an internal solutions port – Lexmark 280 User Manual

Page 23

Advertising
background image

Installing an Internal Solutions Port

The system board supports one optional Lexmark Internal Solutions Port (ISP).

Note: This task requires a flathead screwdriver.

CAUTION—SHOCK HAZARD: If you are installing an Internal Solutions Port (ISP) after setting up the printer,

then turn the printer off and unplug the power cord from the wall outlet before continuing.

Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch

something metal on the printer before touching any system board electronic components or connectors.

1

Access the system board.

2

Unpack the ISP and plastic tee.

Note: Avoid touching the components on the card.

3

Locate the appropriate connector on the system board.

Note: If an optional printer hard disk is currently installed, then it must first be removed. To remove the printer

hard disk:

Additional printer setup

23

Advertising
This manual is related to the following products: